Reverse Decoupage on Glass – Decoupage Art Idea

You are currently viewing Reverse Decoupage on Glass – Decoupage Art Idea
Create custom wall art using Dollar Glass Frames, Roycycled Decoupage Paper, and IOD Transfers.

Reverse Decoupage on Glass - Create Custom Wall Art

Reverse Glass Decoupage using Roycycled Decoupage Paper

Making custom artwork that reflects who you are can be empowering. Living in surroundings that speaks to the heart of who you are enabling us to create our own sanctuaries. A place to get away from the noise of the world. Creating custom art can feel intimidating, but it doesn’t have to be. With a few supplies and a little know-how, you too can create art to reflect your heart.

Follow My YouTube Channel Here
Supplies for reverse glass decoupage using Roycycled Decoupage Paper

Gather your supplies

·        All glass photo frames. I found these at the Dollar Tree

·        Roycycled Industrial Project Blocks Decoupage Paper

·        Wise Owl Varnish in Satin

·        Wise Owl Chalk Synthesis Paint in Snow Owl

·        O-45 Cling-On Paint Brush

·        Wise Owl Glaze (50/50 mixture of Java and Black Walnut)

·        Iron Orchid Designs Entomology Transfer

·        Iron Orchid Designs Fronds Transfer

·        Balled up piece of plastic wrap

·        220 grit sanding block/sanding paper

Start your project by reviewing your decoupage paper, and deciding how to place it on your glass. Trim your paper leaving about ½ inch of excess paper all the way around your glass. Once you’ve decided and trimmed your paper you are ready to start. Apply your Wise Owl Varnish over the surface of your glass. Be sure to lay down an even coat of varnish. Look at your piece from the side. If you see any dry spots, be sure and apply more varnish. Leaving dry spots can cause bubbles under your decoupage.

Position your Roycycled Decoupage Paper

Start your project by reviewing your decoupage paper, and deciding how to place it on your glass. Trim your paper leaving about ½ inch of excess paper all the way around your glass. Once you’ve decided and trimmed your paper you are ready to start. Apply your Wise Owl Varnish over the surface of your glass. Be sure to lay down an even coat of varnish. Look at your piece from the side. If you see any dry spots, be sure and apply more varnish. Leaving dry spots can cause bubbles under your decoupage.

Using plastic wrap to smooth my decoupage paper

Once your glass is completely covered, you are ready to lay down your paper. Lay your paper face down on one end of your glass holding the other end off of the glass. Using your balled-up piece of saran wrap, rub your paper down from one end to the other. Using your plastic wrap, go over your entire piece ensuring good contact between your paper and the glass. Let your paper dry, or use your craft dryer. If you use your craft dryer, be careful not to get the glass too hot. You don’t want to crack your glass. 

Find A Step by Step Decoupage Tutorial Here
Using a 220 grit sanding block to trim the edges of my project

Once your paper is completely dry, use a sanding block to trim. Do not run your sanding block side to side, or up and down. Only drag your sanding block down as you trim to avoid tearing your paper or lifting it. 

Paint the back of your decoupage paper

Create interest on the back of your paper. In the example, I show how to create a hallow. Refer to my “Underpainting Your Decoupage” for more complete instructions on this process. 

If you would like your image to be more opaque, paint over the back of your paper with Wise Owls Chalk Synthesis paint in Snow Owl. Let your paper dry completely, then you can shift your attention to the front of the glass. Don’t worry if your paper wrinkles. The wrinkles will vanish as the paper dries.

Add Iron Orchid Design Transfers
Find Your Roycycled Decoupage Paper Retailer Here

For my project, I used IOD transfers Fronds and Entomology.  This is such an easy decoupage art idea. Review your transfer and decide how you are going to place your transfers. When trimming your transfer, be sure the white backing stays with your piece until you are ready to use it. Once you’ve decided placement, remove your backing paper and apply the transfer to your glass. Once laid down, use the brayer that comes with your transfer to rub it onto the glass. Lift your transfers slowly to ensure the transfer adheres. Once adhered, remove the clear backing paper. Use the paper to rub the transfer and ensure it has adhered to the glass well.

Now your creation is ready to be displayed! Remember, you have the option of using different decoupage paper and transfers to create artwork that resonates with your own aesthetic. You can create pieces that speak to your heart.

Tags: , , , , ,